IE-3300-8P2S-E工业交换机
IE-3300-8P2S-E
IE-3300-8P2S-E工业交换机
Cisco Catalyst ® IE3300 坚固型系列在专为各种扩展企业和工业应用而构建的紧凑型、外形尺寸、模块化交换机中引领了千兆位以太网连接的主流采用。
产品概述
Cisco Catalyst IE3300 坚固型系列交换机以紧凑的外形提供高达 10 GB 的高速以太网连接，专为需要强化产品的各种工业应用而设计。 Cisco Catalyst IE3300 坚固型系列的模块化设计可通过一系列扩展模块选件灵活地扩展到最多 26 个千兆位以太网端口或最多 24 个千兆位以太网端口和 2 个 10 千兆位 (10G) 以太网端口。该平台旨在承受制造、能源、交通、采矿、智能城市以及石油和天然气领域的恶劣环境。 IE3300 平台还非常适合户外空间、仓库和配送中心的扩展企业部署。
这些交换机运行 Cisco IOS ® XE，这是一种具有内置安全性和信任功能的下一代操作系统，具有安全启动、映像签名和 Cisco ® Trust 锚点模块。 Cisco IOS XE 还提供具有开放 API 和数据模型的 API 驱动配置。
Cisco Catalyst IE3300 Rugged 系列可以使用强大的管理工具（例如 Cisco Catalyst Center）进行管理，并且可以使用完全重新设计的用户友好型现代 GUI 工具（称为 WebUI）轻松进行设置。该平台还支持完全灵活的NetFlow (FNF)，通过思科安全网络分析®实时了解流量模式和威胁分析。
Cisco Catalyst IE3300 坚固型系列提供边缘计算功能来运行 IOx 应用程序，从而在 OT 网络中启用新功能，而不影响交换性能。选择 Cisco Cyber Vision 来提高互联工业资产的可见性，或通过安全设备访问为大规模工业资产提供安全的零信任网络访问 (ZTNA)。
Cisco Catalyst IE3300 坚固型系列可通过多达 24 个端口（带扩展模块）提供以太网供电 (PoE)，轻松连接 IP 摄像机、电话、无线接入点、传感器等终端设备并为其供电。千兆系列支持高达 360W 的 PoE/PoE+ 功率预算，10G 系列支持高达 480W 的 IEEE ® 802.3af / 802.3at / 802.3bt（类型 3 和类型 4）功率预算，为最先进的设备供电。
稳健的工业设计
● 专为恶劣环境和温度范围（-40°C 至 +75°C）而设计
● 无风扇、对流冷却且无移动部件，可延长耐用性
● 针对振动、冲击和浪涌以及电噪声进行了硬化处理
● 符合自动化、ITS 和变电站环境的多行业规范
● 提高工业系统和设备的正常运行时间、性能和安全性
● 涵盖广泛的以太网供电 (PoE)（最高可达 IEEE ® 802.3bt 类型 4）应用要求
● 报警I/O，用于监控并向外部设备发送信号
具有 10G 上行链路变体的全千兆位以太网接口
● 为工业领域的新型高速应用提供安全访问
● 有两种基本系统端口配置可用：2 个 1GE 上行链路端口或 2 个 10G 上行链路端口：
◦ 在小型基本系统中可容纳多达 10 个端口 - 2 个 10G 小型可插拔 (SFP+) 上行链路以及 8 个 1GE 铜质 RJ45 下行链路端口（支持 IEEE ® 802.3bt PoE 或非 PoE）
◦ 在小型基础系统中封装多达 10 个 GE 端口 - 2 个 1GE 小型可插拔 (SFP) 上行链路加上 8 个 1GE 铜质 RJ45 下行链路端口（支持 PoE+ 或非 PoE）
● 可扩展
◦ 通过连接 8 个兼容模块之一（铜缆、PoE、光纤和 2.5G，具有 IEEE ® 802.3bt 类型 4 选项），最多可连接 26 个 GE 端口
◦ 通过连接 8 个兼容模块之一（铜缆、PoE、光纤和 2.5G，带 IEEE ® 802.3bt 类型 4 选项），最多可连接 24 个 GE 端口和 2 个 10G 端口
● 连接高速无线接入点（802.11n、802.11ac、802.11ac WAVE 2、802.11ax）
● 支持超高清 (UHD)、PTZ IP 摄像机、可编程逻辑控制器 (PLC) 和 Wi-Fi 6 接入点
● 为新网络配置提供多环和冗余环拓扑
● 在需要更远距离连接的情况下扩展地理可扩展性
高密度工业以太网供电 (PoE)
● 支持
◦ 最多 24 个 PoE/PoE+ 端口或 4 个 802.3bt 类型 4 端口（带 2.5G 扩展模块），带有全 GE PoE 支持底座 [功率预算 - 360W]
◦ 对于 10G、支持 PoE 的系统，最多有 24 个 PoE/PoE+ 端口或 8 个“802.3bt 类型 3”端口或 4 个“802.3bt 类型 4”端口 [功率预算 – 480 瓦]
● 通过限制布线、配电板和断路器来控制成本
● 减少设备需求，从而减少空间需求并减少散热
● 支持即用型 PoE 设备，例如 IP 电话、摄像头和无线接入点
用户友好的 GUI，称为 WebUI
● 易于配置和监控
● 无需更复杂的终端仿真程序
● 降低部署成本
SwapDrive 用于零配置更换
● 真正的零配置，发生故障时交换机更换简单
● 无需网络专业知识
● 有助于确保快速恢复
完全灵活的 NetFlow (FNF)
● 提供增强的流量和威胁可见性
● 优化网络基础设施、降低运营成本、改进容量规划和安全事件检测
IPv6 就绪徽标
● IPv6 Ready 徽标认证
PID详细信息
尺寸（高 x 宽 x 深）
重量
安装
IE-3300-8T2S-E
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
3.8 磅
1.7 千克
DIN导轨
IE-3300-8T2S-A
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
3.8 磅
1.7 千克
DIN导轨
IE-3300-8P2S-E
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
3.8 磅
1.7 千克
DIN导轨
IE-3300-8P2S-A
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
3.8 磅
1.7 千克
DIN导轨
IE-3300-8T2X-E
6 英寸 X 3.8 英寸 X 5.3 英寸
15.2 厘米。 x 9.7 厘米。 x 13.5 厘米
3.6 磅
1.6 千克
DIN导轨
IE-3300-8T2X-A
6 英寸 X 3.8 英寸 X 5.3 英寸
15.2 厘米。 x 9.7 厘米。 x 13.5 厘米
3.6 磅
1.6 千克
DIN导轨
IE-3300-8U2X-E
6 英寸 X 4.4 英寸 X 5.3 英寸
15.2 厘米。 x 11.2 厘米。 x 13.5 厘米
4.5 磅
2.0 公斤
DIN导轨
IE-3300-8U2X-A
6 英寸 X 4.4 英寸 X 5.3 英寸
15.2 厘米。 x 11.2 厘米。 x 13.5 厘米
4.5 磅
2.0 公斤
DIN导轨
IEM-3300-4MU=
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
3.0 磅
1.4 千克
DIN导轨
IEM-3300-8T=
6 英寸 X 2.6 英寸 X 5.3 英寸
15.2 厘米。 x 6.6 厘米。 x 13.5 厘米
2.0 磅
0.91 千克
DIN导轨
IEM-3300-8P=
6 英寸 X 2.6 英寸 X 5.3 英寸
15.2 厘米。 x 6.6 厘米。 x 13.5 厘米
2.0 磅
0.91 千克
DIN导轨
IEM-3300-8S=
6 英寸 X 2.6 英寸 X 5.3 英寸
15.2 厘米。 x 6.6 厘米。 x 13.5 厘米
2.0 磅
0.91 千克
DIN导轨
IEM-3300-16T=
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
2.7 磅
1.2 千克
DIN导轨
IEM-3300-16P=
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
2.7 磅
1.2 千克
DIN导轨
IEM-3300-6T2S=
6 英寸 X 2.6 英寸 X 5.3 英寸
15.2 厘米。 x 6.6 厘米。 x 13.5 厘米
2.0 磅
0.91 千克
DIN导轨
IEM-3300-14T2S=
6 英寸 X 3.6 英寸 X 5.3 英寸
15.2 厘米。 x 9.1 厘米。 x 13.5 厘米
2.7 磅
1.2 千克
The Cisco Catalyst® IE3300 Rugged Series ushers in mainstream adoption of Gigabit
Ethernet connectivity in a compact, form-factor, modular switch that is purpose-built for
a wide variety of extended enterprise and industrial applications.
Product overview
Cisco Catalyst IE3300 Rugged Series switches deliver high-speed Gigabit Ethernet connectivity in a
compact form factor, and are designed for a wide range of industrial applications where hardened
products are required. The modular design of the Cisco Catalyst IE3300 Rugged Series offers the flexibility
to expand to up to 26 ports of Gigabit Ethernet with a range of expansion module options. The platform is
built to withstand harsh environments in manufacturing, energy, transportation, mining, smart cities, and oil
and gas. The IE3300 platform is also ideal for extended enterprise deployments in outdoor spaces,
warehouses, and distribution centers.
These switches run Cisco IOS® XE, a next-generation operating system with built-in security and trust,
featuring secure boot, image signing, and the Cisco® Trust anchor module. Cisco IOS XE also provides API
driven configuration with open APIs and data models.
The Cisco Catalyst IE3300 Rugged Series can be managed with powerful management tools such as
Cisco DNA Center and Cisco Industrial Network Director, and can be easily set up with a completely
redesigned user-friendly modern GUI tool called WebUI. The platform also supports Full Flexible NetFlow
(FNF) for real-time visibility into traffic patterns and threat analysis with Cisco Stealthwatch® .
The IE3300 series (with expansion module) supports power budget of up to 360W for PoE/PoE+, shared
across 24 ports, and is ideal for connecting PoE-powered end devices such as IP cameras, phones,
wireless access points, sensors, and more.
Figure 1. © 2020 Cisco and/or its affiliates. All rights reserved.
Page 4 of 20
Features and benefits
Table 1.
IE3300 features and benefits
Feature
Benefit
Robust industrial design
● Built for harsh environments and temperature ranges (-40°C to +75°C)
● Fanless, convection-cooled with no moving parts for extended durability
● Hardened for vibration, shock and surge, and electrical noise immunity
● Complies with multi-industry specifications for automation, ITS, and substation environments
● Improves uptime, performance, and safety of industrial systems and equipment
● Covers a wide range of Power over Ethernet (PoE) application requirements
● Alarm I/O for monitoring and signaling to external equipment
Full Gigabit Ethernet
interfaces
● Provides secure access for new high-speed applications in the industrial space
● Packs up to 10 ports of GE - 2x1 Gigabit Small Form-Factor Pluggable (SFP) uplinks plus 8x1 Gigabit
copper RJ45 downlink ports (with PoE+ or non PoE) in a small form-factor base system
● Expandable to 26 ports of GE by attaching one of 7 compatible modules (copper, PoE, fiber options)
● Connects high-speed wireless access points (802.11n, 802.11ac)
● Enables High-Definition (HD) IP cameras and Programmable Logic Controllers (PLC)
● Delivers multiple rings and redundant ring topologies for new network configurations
● Extends geographical scalability where longer-distance connectivity is required
High-density industrial
Power over Ethernet (PoE)
● Supports up to 24 PoE/PoE+ ports [Power budget - 360W]
● Controls costs by limiting wiring, distribution panels, and circuit breakers
● Reduces equipment needs, thus requiring less space and reducing heat dissipation
● Enables ready-to-use PoE devices, such as IP phones, cameras, and wireless access points
User-friendly GUI, called
WebUI
● Allows for easy configuration and monitoring
● Eliminates the need for more complex, terminal emulation programs
● Reduces the cost of deployment
SwapDrive for zero
configuration
replacement
● True zero-configuration and simple switch replacement in the event of a failure
● No networking expertise required
● Helps ensure fast recovery
Full Flexible NetFlow (FNF) ● Provides enhanced flow and threat visibility
● Enables optimization of the network infrastructure, reduces operation costs, and improves capacity
planning and security incident detection
Products overview
Table 2.
Product feature sets
Product family
Platforms supported
Cisco IOS Software image (feature sets) supported
IE3000
IE3300
Network Essentials1 , Network Advantage1
1 The Hardware PID with “-E” suffix is Network Essentials and with “-A” suffix is Network Advantage. © 2020 Cisco and/or its affiliates. All rights reserved.
Page 5 of 20
Product specifications
Table 3 highlights the hardware configuration for Cisco Catalyst IE3300 Rugged Series switches and the
supported modules with these switches.
Table 3.
IE3300 Hardware configurations (incl. IE3300 modules)
Product number*
Total ports 10/100/1000 RJ45
Copper ports
100/1000
SFP ports
Software
license(Default)
PoE/
PoE (+) budget
IE-3300-8T2S-E
10
8
2
Network Essentials N.A.
IE-3300-8T2S-A
10
8
2
Network Advantage N.A.
IE-3300-8P2S-E
10
8
2
Network Essentials 240W (base),
360W (with module)
IE-3300-8P2S-A
10
8
2
Network Advantage 240W (base),
360W (with module)
IEM-3300-8P=
8
8
N.A.
N.A.
Supported with IE3300 PoE
base modules to provide a
total POE budget of 360W
IEM-3300-16P=
16
16
N.A.
N.A.
Supported with IE3300 PoE
base modules to provide a
total POE budget of 360W
IEM-3300-8S=
8
N.A.
8
N.A.
N.A.
IEM-3300-8T=
8
8
N.A.
N.A.
N.A.
IEM-3300-16T=
16
16
N.A.
N.A.
N.A.
IEM-3300-6T2S=
8
6
2
N.A.
N.A.
IEM-3300-14T2S=
16
14
2
N.A.
N.A.
*PoE modules can only be plugged with PoE base switch. IE3300 expansion modules can also be plugged with IE3400 base switch.
However, this combination prevents support for advanced security feature such as SGT/SGACL on the IE3400 base switch.
Table 4 highlights the hardware specifications for Cisco Catalyst IE3300 Rugged Series switches.
Table 4.
IE3300 hardware specifications
Hardware specification
Cisco IE-3300-8T2S-E / -A
Cisco IE-3300-8P2S-E / -A
PoE power budget
Not applicable
360W1 (including expansion module)
Removable storage
USB2,3 , SD card2
USB2,3 , SD card2
Alarms
2 alarms in, 1 alarm out
2 alarms in, 1 alarm out© 2020 Cisco and/or its affiliates. All rights reserved.
Page 6 of 20
Hardware specification
Cisco IE-3300-8T2S-E / -A
Cisco IE-3300-8P2S-E / -A
Console ports
1 RS-232 (via RJ-45), 1 USB Mini Type B 1 RS-232 (via RJ-45), 1 USB Mini Type B
Power inputs
Dual DC power inputs
Dual DC power inputs
1 In order to achieve 360W power budget, the minimum power requirements as specified in Table 8 for the switch need to be
considered when selecting the power supply.
2 The SD card and USB are optional and are not shipped by default with the switch.
3 USB 2.0 to load system images and set configurations
Figure 2.
Expansion modules
Table 5 highlights the hardware configuration for Cisco Catalyst IE3300 Rugged Series modules.
Table 5.
Hardware configuration for Cisco Catalyst IE3300 Rugged Series modules
Descriptions
Total ports on
expansion
module
Copper (RJ45)
PoE/PoE+
SFP
Total system ports
(including expansion
module)
IEM-3300-8T=
8
8
-
-
18
IEM-3300-8P=
8
-
8
18
IEM-3300-8S=
8
-
-
8
18
IEM-3300-16T=
16
16
26
IEM-3300-16P=
16
-
16
-
26
IEM-3300-6T2S=
8
6
-
2
18
IEM-3300-14T2S=
16
14
-
2
26
Table 6 highlights the physical configuration for Cisco Catalyst IE3300 Rugged Series switches and
modules.
Table 6.
IE3300 physical configurations
PID details
Dimensions (H x W x D)
Weight
Mounting
IE-3300-8T2S-E
6 in. X 3.6 in. X 5.3 in.
3.8 lbs
DIN rail© 2020 Cisco and/or its affiliates. All rights reserved.
Page 7 of 20
PID details
Dimensions (H x W x D)
Weight
Mounting
IE-3300-8T2S-A
6 in. X 3.6 in. X 5.3 in.
3.8 lbs
DIN rail
IE-3300-8P2S-E
6 in. X 3.6 in. X 5.3 in.
3.8 lbs
DIN rail
IE-3300-8P2S-A
6 in. X 3.6 in. X 5.3 in.
3.8 lbs
DIN rail
IEM-3300-8T=
6 in. X 2.4 in. X 5.3 in.
2.0 lbs
DIN rail
IEM-3300-8P=
6 in. X 2.4 in. X 5.3 in.
2.0 lbs
DIN rail
IEM-3300-8S=
6 in. X 2.4 in. X 5.3 in.
2.0 lbs
DIN rail
IEM-3300-16T=
6 in. X 3.4 in. X 5.3 in.
2.7 lbs
DIN rail
IEM-3300-16P=
6 in. X 3.4 in. X 5.3 in.
2.7 lbs
DIN rail
IEM-3300-6T2S=
6 in. X 2.4 in. X 5.3 in.
2.0 lbs
DIN rail
IEM-3300-14T2S=
6 in. X 3.4 in. X 5.3 in.
2.7 lbs
DIN rail
System dimensions
Front view
Module dimensions – Front view© 2020 Cisco and/or its affiliates. All rights reserved.
Page 8 of 20
Top view
Table 7 highlights the performance and scalability features for Cisco Catalyst IE3300 Rugged Series
switches.
Table 7.
IE3300 performance and scalability features
Features
Cisco IE-3300-8T2S-E / -A
Cisco IE-3300-8P2S-E / -A
Forwarding rate
Line rate for all ports and all packet sizes
Line rate for all ports and all packet sizes
Number of queues
8
8
Unicast MAC addresses
8K
8K
Internet Group Management
Protocol (IGMP) multicast
groups
1K
1K
No. of VLANs
256
256
IPv4 Indirect routes1
2000
2000
IPv6 Indirect routes1
512
512
Spanning Tree Protocol (STP)
instances
128
128
Access Control Lists
(PACL/VACL/RACL)
1.5K
1.5K
DRAM
2 GB
2 GB
Flash [User Accessible]
1.5 GB
1.5 GB
SD card capacity2
4 GB
4 GB
Jumbo Frames
8996 bytes
8996 bytes
1 Supported with -A SKUs or -E SKUs (with Network Advantage license)
2The SD card is optional and is not shipped by default with the switch.© 2020 Cisco and/or its affiliates. All rights reserved.
Page 9 of 20
Table 8 highlights the power specifications for Cisco Catalyst IE3300 Rugged Series switches.
Table 8.
IE3300 power specifications
Features
Cisco IE-3300-8T2S-E / -A
Cisco IE-3300-8P2S-E / -A
Input voltage range
Redundant DC input voltage: 9.6 to 60VDC
Redundant DC input voltage: 9.6 to 60VDC
48VDC is required for PoE and 54VDC is
required for PoE+
Maximum Input current
3.8A
10.5A
Power consumption1
23W
32W
1 Power consumption for non PoE supported model is measured at 12V and for the PoE supported model is measured at 54V. Power
consumption does not include PoE power.
Table 9 highlights the power specifications for supported expansion modules in Cisco Catalyst IE3300
Rugged Series switches.
Table 9.
IEM3300 modules power consumption
Product ID detail
Power Consumption1
IEM-3300-8T=
6W
IEM-3300-8P=
14W
IEM-3300-8S=
19W
IEM-3300-16T=
12W
IEM-3300-16P=
21W
IEM-3300-6T2S=
9W
IEM-3300-14T2S=
16W
1 Power consumption for non PoE supported model is measured at 12V and for the PoE supported model is measured at 54V.
Table 10 highlights the power supply options for Cisco Catalyst IE3300 Rugged Series switches.
Table 10. Power supply options
Product Number
Wattage
Rated nominal input
operating range
PoE/PoE+
support1
More Details
PWR-IE50W-AC=
50W
AC 100-240V/1.25A 50-60Hz
or
DC 125-250V/1.25A
No
Click here for
more details on
these DIN Rail
power supplies
PWR-IE50W-AC-IEC=
50W
AC 90-264V
No
PWR-IE50W-AC-L= 2
50W
AC 100-240V/1.2A 50-60Hz
No© 2020 Cisco and/or its affiliates. All rights reserved.
Page 10 of 20
Product Number
Wattage
Rated nominal input
operating range
PoE/PoE+
support1
More Details
PWR-IE65W-PC-AC=
65W
AC 100-240V / 1.4A 50-60Hz
or
DC 125-250V / 1.0A
Yes
PWR-IE65W-PC-DC=
65W
DC 24-48VDC / 4.5A
Yes
PWR-IE170W-PC-AC=
170W
AC 100-240V / 2.3A 50-60Hz
or
DC 125-250V / 2.1A
Yes
PWR-IE170W-PC-DC=
170W
DC 12-54VDC / 2.3A
Yes
PWR-IE240W-PCAC-L= 2
240W
AC 100-240V/3.5A 50-60Hz
Yes
PWR-IE480W-PCAC-L= 2
480W
AC 100-240V/6.0A 50-60Hz
Yes
1 The entire power budget for the switch and PoE ports must stay within the power supply wattage.
2 The power supplies are not certified for smart grid and hazardous locations. These power supplies are IP20 rated.
Table 11 and 12 highlight the supported software features for Cisco Catalyst IE3300 Rugged Series
switches.
Table 11. Key supported software features (Network Essentials License)
Network Essentials
License (Perpetual)
Features
Layer 2 switching
IEEE 802.1, 802.3 standard, NTP, UDLD, CDP, LLDP, unicast MAC filter, PAgP, LACP VTPv2,
VTPv3, EtherChannel, Q-in-Q tunneling, voice VLAN, PVST+, MSTP, and RSTP
Multicast
IGMPv1, v2, v3 snooping, IGMP filtering, IGMP querier
Management
WebUI, MIB, SmartPort, SNMP, syslog, DHCP server, SPAN session, RSPAN, FSPAN,
Express setup, NETCONF, RESTCONF
Security
Port security, 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, dynamic ARP
inspection, IP source guard, guest VLAN, MAC authentication bypass, 802.1x multidomain
authentication, storm control - unicast, multicast, broadcast, SCP, SSH, SNMPv3, TACACS+,
RADIUS server/client, MAC address notification, BPDU guard, Access Lists
(PACL,VACL,RACL), SUDI 2099 (Secure Unique Device identifier), Full Flexible NetFlow
(FNF), MACsec-128
Quality of Service (QoS)
Ingress policing, rate limit, egress queuing and shaping, auto QoS
IPv6
IPv6 host support, SNMP over IPv6, HTTP/HTTP(s) over IPv6, SNMP over IPv6, Syslog over
IPv6, DHCPv6 relay source, DHCPv6 bulk lease query (RFC 5460), IPv6 stateless Auto Config
SCP/SSH, Radius, TACACS+, NTP over IPv6, IPv6 VRF aware BGPv6, IPV6 ND cache expire,
IPv6 support for TFTP, IPv6 DNS transport, IPv6 QoS, IPv6 FHS RA Guard, IPv6 FHS DHCPv6
Guard
Layer 3 routing
Inter-VLAN routing, Static routing
Industrial Ethernet
CIP Ethernet/IP, IEEE 1588 PTP v2 (default and power), PROFINET
Redundancy
Resilient Ethernet Protocol (REP) ring, PROFINET-Media Redundancy Protocol (MRP), © 2020 Cisco and/or its affiliates. All rights reserved.
Page 11 of 20
Network Essentials
License (Perpetual)
Features
REP Preferred, Fast REP
Utility
Dying gasp, SCADA protocol classification - GOOSE messaging, MODBUS TCP/IP
Automation
YANG, NETCONF, RESTCONF
Industrial Management
Layer 2 switching with 1:1 switch Network Address Translation (L2NAT)1
1 Supported on Uplink ports
Table 12. Key supported software features (Network Advantage License)
Network Advantage
License (Perpetual)
Features
IP routing Protocols
OSPF (v4 and v6), BGP (v4 and v6), RIP (V1 and V2), ISIS (v4 and v6), EIGRP (v4 and v6),
Policy based routing(PBR), VRRP(v4 and v6),, HSRP(v4 and v6)
Virtualization
Vrf-lite
Security
MACsec-256
IP Multicast
PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), PIM sparse dense mode,
MSDP, Multicast routing BSR (IPv4/IPv6), Auto RP(IPv4), Embedded RP(IPv6)
Table 13 highlights the details on Cisco DNA Essentials and Cisco DNA Advantage License for
Cisco Catalyst IE3300 Rugged Series switches.
Table 13. Cisco IE3300 Cisco DNA Essentials and Cisco DNA Advantage license
Feature
Description
Cisco DNA
Essentials
Cisco DNA
Advantage
Cisco DNA Center
Discovery, Topology, Inventory, software image
management
YES
YES
Visibility
Cisco DNA assurance, Device 360
YES
YES
Day-zero network bring-up
automation
Cisco Network Plug-and-Play application
YES
YES
Software-define Access
Policy based automation, IE3300 can function as
an SD-Access extended node
N.A.
YES
Cisco DNA licenses for Industrial Ethernet switches are add-on/optional and not mandatory. These do not
include Network Tier features.
Table 14 highlights the compliance specifications for Cisco Catalyst IE3300 Rugged Series switches.© 2020 Cisco and/or its affiliates. All rights reserved.
Page 12 of 20
Table 14. Compliance Specifications1
Descriptions
Specifications
Industrial Automation Control
System
IEC 62443-4-1
IEC 62443-4-2
Electromagnetic emissions
FCC 47 CFR Part 15 subpart B Class A
EN 55032/CISPR 32 Class A
VCCI Class A
AS/NZS CISPR 32 Class A
CISPR 11 Class A
ICES 003 Class A
CNS 13438 Class A
KN 32 Class A
EN 300 386
Electromagnetic immunity
CISPR 24
EN 55024
KN 35
EN 61000-4-2 Electro Static Discharge (air – 15kV, contact – 8kV)
EN 61000-4-3 Radiated RF (10V/m UTP, 20V/m STP)
EN 61000-4-4 Electromagnetic Fast Transients (4kV)
EN 61000-4-5 Surge (2KV/1KV Power, 4KV STP)
EN 61000-4-6 Conducted RF (10Vrms UTP)
EN 61000-4-8 Power Frequency Magnetic Field (1000A/m)
EN 61000-4-10 Pulsed Magnetic Field (30 A/m)
EN 61000-4-16 Conducted CM Disturbances (30V, Cont/ 300V, 1 sec)
EN 61000-4-17 Ripple Immunity DC Power (10%)
EN 61000-4-18 Damped Oscillatory Wave (2.5kV, 1MHz)
EN-61000-4-29 DC Voltage Dips and Interruptions
Industry standards
EN 61000-6-2 Industrial Immunity
EN 61000-6-4 Industrial Emissions
EN 61000-6-1 Light Industrial Immunity
EN 61326-1 Measurement, Control and Laboratory Equipment
IEEE 1613 Electric Power Stations Communications Networking2
EN/IEC 61850-3 Electric Substations Communications Networking2
EN50121-4 Railway – Signaling and Telecommunications Apparatus
ODVA Industrial EtherNet/IP
NEMA TS 2-2016
IP30© 2020 Cisco and/or its affiliates. All rights reserved.
Page 13 of 20
Descriptions
Specifications
Safety standards and
certifications
Information Technology Equipment:
UL/CSA 60950-1,CB to IEC 60950-1 with all country deviations
UL/CSA 62368-1, CB to IEC 62368-1 with all country deviations2
Industrial floor (control equipment):
UL/CSA 61010-2-201
CB report and certificate to IEC/EN 61010-2-201
Hazardous locations:
UL121201(Class l, Div 2, groups A-D)
CSA 213 (Class l, Div 2, groups A-D)
UL/CSA 60079-0, -15 (Class l, Zone 2, Gc/IIC)
IEC 60079-0, -15 IECEx test report (Class l, Zone 2, Gc/IIC)
EN 60079-0, -15 ATEX certificate (Class l, Zone 2, Gc/IIC) Cabinet enclosure required
Operating environment
Operating temperature:
-40°C to +70°C (40 LFM vented enclosure)
-40°C to +60°C (sealed enclosure)
-34°C to +75°C (Min. 200 LFM fan or blower-equipped enclosure)
+85°C (type tested for 16 hours)
Altitude: up to 15,000 feet
Storage environment
Temperature: -40°C to +85°C degrees
Altitude: 15,000 feet
IEC 60068-2-14
Humidity
Relative humidity of 5% to 95% non-condensing
IEC 60068-2-78
IEC 60068-2-30
Shock and vibration
IEC 60068-2-27 (operational shock, 50G, 3ms, half sine)
IEC 60068-2-27 (non-operational shock, 65-80G, 9ms, trapezoidal)
MIL-STD-810, Method 514.4
Corrosion
IEC 60068-2-52 (salt fog)
IEC 60068-2-60 (flowing mixed gas)
Warranty
Five-year limited hardware warranty on all IE3300 product IDs and all Industrial Ethernet
(IE) power supplies. See more information under the Warranty section
1 For more detailed information on safety approved power/thermal ratings refer the Hardware Installation Guide.
2 Test in progress.
Table 15 highlights Mean-Time-Between-Failures (MTBF) for Cisco Catalyst IE3300 Rugged Series
switches.© 2020 Cisco and/or its affiliates. All rights reserved.
Page 14 of 20
Table 15. MTBF Information
Product ID detail
Rated MTBF (hours)
IE-3300-8T2S-E
633,420
IE-3300-8T2S-A
633,420
IE-3300-8P2S-E
611,350
IE-3300-8P2S-A
611,350
IEM-3300-8T=
3,041,040
IEM-3300-8P=
2,931,233
IEM-3300-8S=
6,810,960
IEM-3300-16T=
1,594,210
IEM-3300-16P=
1,043,520
IEM-3300-6T2S=
3,729,130
IEM-3300-14T2S=
1,865,300
Table 16 highlights information about management and standards for Cisco Catalyst IE3300 Rugged Series
switches.
Table 16. Management and Standards
Descriptions
Specifications
IEEE standards
IEEE 802.1D MAC Bridges, STP
IEEE 802.1p Layer2 COS prioritization
IEEE 802.1q VLAN
IEEE 802.1s Multiple Spanning-Trees
IEEE 802.1w Rapid Spanning-Tree
IEEE 802.1x Port Access Authentication
IEEE 802.1AB LLDP
IEEE 802.3ad Link Aggregation (LACP)
IEEE 1588v2 PTP Precision Time Protocol
IEEE 802.3ah 100BASE-X SMF/MMF only
IEEE 802.3x full duplex on 10BASE-T
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet plus
RFC compliance
RFC 768: UDP
RFC 783: TFTP
RFC 791: IPv4 protocol
RFC 792: ICMP
RFC 793: TCP
RFC 826: ARP
RFC 854: Telnet
RFC 1492: TACACS+
RFC 1493: Bridge MIB Objects
RFC 1534: DHCP and BOOTP interoperation
RFC 1542: Bootstrap Protocol
RFC 1643: Ethernet Interface MIB
RFC 1757: RMON
RFC 2068: HTTP © 2020 Cisco and/or its affiliates. All rights reserved.
Page 15 of 20
Descriptions
Specifications
RFC 959: FTP
RFC 1157: SNMPv1
RFC 1901,1902-1907 SNMPv2
RFC 2273-2275: SNMPv3
RFC 2571: SNMP Management
RFC 1166: IP Addresses
RFC 1256: ICMP Router Discovery
RFC 1305: NTP
RFC 951: BootP
RFC 2131, 2132: DHCP
RFC 2236: IGMP v2
RFC 3376: IGMP v3
RFC 2474: DiffServ Precedence
RFC 3046: DHCP Relay Agent Information Option
RFC 3580: 802.1x RADIUS
RFC 4250-4252 SSH Protocol
RFC 5460: DHCPv6 bulk lease query
SNMP MIB objects
802.1X MIB
CISCO-DHCP-SNOOPING-MIB
CISCO-UDLDP-MIB
CISCO-ENVMON-MIB
CISCO-PRIVATE-VLAN-MIB
CISCO-PAE-MIB
Cisco-Port-QoS-MIB
CISCO-ERR-DISABLE-MIB
CISCO- PROCESS-MIB
LLDP-MIB
CiscoMACNotification-MIB
CISCO-CONFIG-COPY-MIB
LLDP-MED-MIB
Bridge-MIB
CISCO-CAR-MIB
CISCO-LAG-MIB
CISCO-SYSLOG-MIB
CISCO-FTP-CLIENT-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
Cisco-REP-MIB
CISCO-PORT-STORM-CONTROL-MIB
CISCO-CDP-MIB
CISCO-IP-STAT-MIB
CISCO-LICENSE-MGMT-MIB
CISCO-STP-EXTN-MIB
CISCO-VTP-MIB
IEEE8023-LAG-MIB
CISCO-IF-EXTENSION-MIB
CISCO-IMAGE-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PING-MIB
SNMP-TARGET-EXT-MIB
IF_MIB
ENTITY-MIB
LLDP-EXT-PNO-MIB
NOTIFICATION-LOG-MIB
OLD-CISCO-CPU-MIB
ETHERLIKE-MIB
OLD-CISCO-SYSTEM-MIB
OLD-CISCO-MEMORY-MIB
RMON-MIB
SNMP-COMMUNITY-MIB
SNMP-FRAMEWORK-MIB
SNMP-PROXY-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMP-USM-MIB
CISCO-DATACOLLECTION-MIB
CISCO-CABLE-DIAG-MIB
CISCO -PORT-SECURITY-MIB
BULK_FILE_MIB
NAC-NAD-MIB
CISCO-ENTITY-ALARAM-MIB
SNMP-VIEW-BASED-ACM-MIB© 2020 Cisco and/or its affiliates. All rights reserved.
Page 16 of 20
Descriptions
Specifications
SMON-MIB
CISCO-ACCESS-ENVMON-MIB
CISCO-CALLHOME-MIB
CISCO-CONFIG-MAN-MIB
CISCO-FLASH-MIB
CISCO-ENTITY-SENSOR-MIB
IP-MIB
CISCO-PAGP-MIB
CISCO-MAC-AUTH-BYPASS-MIB
CISCO-AUTH-FRAMEWORK-MIB
CISCO-BRIDGE-Ext-MIB
SNMPv2-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-PRODUCTS-MIB
IP-FORWARD-MIB
BGP-CISCO-BGP-MIBv2
Table 17 highlights information about supported SFPs for Cisco Catalyst IE3300 Rugged Series switches.
Table 17. SFP Support
Part number
Specifications
SFP type Temperature
range1
Maximum
distance
Cable type
Dom support
GLC-FE-100FX-RGD
100BASE-FX
FE
IND
2 km
Multimode fiber
(MMF)
No
GLC-FE-100LX-RGD
100BASE-LX10
FE
IND
10 km
Single-Mode
Fiber (SMF)
No
GLC-FE-100FX
100BASE-FX
FE
COM
2 km
MMF
No
GLC-FE-100LX
100BASE-LX10
FE
COM
10 km
SMF
No
GLC-FE-100EX
100BASE-EX
FE
COM
40 km
SMF
No
GLC-FE-100ZX
100BASE-ZX
FE
COM
80 km
SMF
No
GLC-FE-100BX-U
100BASE-BX10 FE
COM
10 km
SMF
No
GLC-FE-100BX-D
100BASE-BX10 FE
COM
10 km
SMF
No
GLC-SX-MM-RGD
1000BASE-SX
GE
IND
220-550 m MMF
Yes
GLC-LX-SM-RGD
1000BASE
LX/LH
GE
IND
550 m /
10 km
MMF / SMF
Yes
GLC-ZX-SM-RGD
1000BASE-ZX
GE
IND
70 km
SMF
Yes
SFP-GE-S
1000BASE-SX
GE
EXT
220-550 m MMF
Yes
SFP-GE-L
1000BASE
LX/LH
GE
EXT
550 m /
10 km
MMF / SMF
Yes
SFP-GE-Z
1000BASE-ZX
GE
EXT
70 km
SMF
Yes
GLC-BX-U
1000BASE-BX10 GE
COM
10 km
SMF
Yes
GLC-BX-D
1000BASE-BX10 GE
COM
10 km
SMF
Yes© 2020 Cisco and/or its affiliates. All rights reserved.
Page 17 of 20
Part number
Specifications
SFP type Temperature
range1
Maximum
distance
Cable type
Dom support
GLC-SX-MM
1000BASE-SX
GE
COM
220-550 m MMF
Yes
GLC-LH-SM
1000BASE
LX/LH
GE
COM
550 m / 10
km
MMF / SMF
Yes
GLC-ZX-SM
1000BASE-ZX
GE
COM
70 km
SMF
Yes
GLC-EX-SMD
1000BASE-EX
GE
COM
40 km
SMF
Yes
GLC-TE
1000BASE-T
GE
EXT
100 m
Cat5e
No
GLC-BX40-U-I=
1000BASE-BX40 GE
IND
40km
SMF
Yes
GLC-BX40-D-I=
1000BASE-BX40 GE
IND
40km
SMF
Yes
GLC-BX40-DA-I=
1000BASE-BX40 GE
IND
40km
SMF
Yes
GLC-BX80-U-I=
1000BASE-BX80 GE
IND
80km
SMF
Yes
GLC-BX80-D-I=
1000BASE-BX80 GE
IND
80km
SMF
Yes
GLC-SX-MMD=
1000BASE-SX
GE
EXT
550m
MMF
Yes
GLC-LH-SMD=
1000BASE
LX/LH
GE
EXT
550m/10km MMF/SMF
Yes
GLC-ZX-SMD=
1000BASE-ZX
GE
EXT
70km
SMF
Yes
GLC-T-RGD=
1000BASE-T
GE
IND
100m
Copper
NA
1 If non-industrial SFPs (EXT, COM) are used, the switch operating temperature must be derated.
Ordering information
Table 18 lists the ordering information for fixed system, expansion modules and memory that are
commonly used with the Cisco Catalyst IE3300 switches.
Table 18. Ordering information
Product ID detail
Description
IE-3300-8T2S-E
Catalyst IE3300 with 8 GE Copper and 2 GE SFP, Modular, Network Essentials
IE-3300-8P2S-E
Catalyst IE3300 with 8 GE PoE+ and 2 GE SFP, Modular, Network Essentials
IE-3300-8T2S-A
Catalyst IE3300 with 8 GE Copper and 2 GE SFP, Modular, Network Advantage
IE-3300-8P2S-A
Catalyst IE3300 with 8 GE PoE/PoE+ and 2 GE SFP, Modular, Network Advantage
IEM-3300-8T
Catalyst IE3300 with 8 GE Copper ports, Expansion Module
IEM-3300-8P
Catalyst IE3300 w/ 8 GE PoE/PoE+ Copper ports, Expansion Module© 2020 Cisco and/or its affiliates. All rights reserved.
Page 18 of 20
Product ID detail
Description
IEM-3300-8S
Catalyst IE3300 with 8 GE SFP ports, Expansion Module
IEM-3300-16T
Catalyst IE3300 with 16 GE Copper ports, Expansion Module
IEM-3300-16P
Catalyst IE3300 with 16 GE PoE/PoE+ Copper, Expansion Module
IEM-3300-6T2S
Catalyst IE3300 with 6GE Copper + 2GE SFP, Expansion Module
IEM-3300-14T2S
Catalyst IE3300 with 14GE Copper + 2GE SFP, Expansion Module
SD-IE-4GB=
IE 4GB SD memory card for IE
STK-RACK-DINRAIL=
19” DIN Rail mount kit
IE3300-NW-A=
Network Advantage License for IE3300, Perpetual
IE3300-DNA-E
Cisco DNA Essentials license for IE3300 Series
IE3300-DNA-E-3Y
IE 3300 Cisco DNA Essentials, 3 Year Term license
IE3300-DNA-E-5Y
IE 3300 Cisco DNA Essentials, 5 Year Term license
IE3300-DNA-A
Cisco DNA Advantage license for IE3300 Series
IE3300-DNA-A-3Y
IE 3300 Cisco DNA Advantage, 3 Year Term license
IE3300-DNA-A-5Y
IE 3300 Cisco DNA Advantage, 5 Year Term license
LIC-MRP-MGR-XE=
MRP Ring Manager License
LIC-MRP-CLIENT-XE=
MRP Ring Client License
Warranty
Five-year limited HW warranty on all IE3300 PIDs and all IE Power Supplies (see table 10 above)
See link below for more details on warranty
https://www.cisco.com/c/en/us/products/warranties/warranty-doc-c99-740591.html.
Cisco environmental sustainability
Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions,
operations, and extended operations or supply chain is provided in the “Environment Sustainability” section
of Cisco’s Corporate Social Responsibility (CSR) Report.
Reference links to information about key environmental sustainability topics (mentioned in the “Environment
Sustainability” section of the CSR Report) are provided in the following table:
Sustainability topic
Reference
Information on product material content laws and regulations
Materials
Information on electronic waste laws and regulations, including products, batteries, and packaging WEEE compliance© 2020 Cisco and/or its affiliates. All rights reserved.
Page 19 of 20
Cisco makes the packaging data available for informational purposes only. It may not reflect the most
current legal developments, and Cisco does not represent, warrant, or guarantee that it is complete,
accurate, or up to date. This information is subject to change without notice.
Cisco Services
https://www.cisco.com/web/services/.
Cisco Capital
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business
transformation and help you stay competitive. We can help you reduce the total cost of ownership,
conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can
help you acquire hardware, software, services and complementary third-party equipment in easy,
predictable payments. Learn more.© 2020 Cisco and/or its affiliates. All rights reserved.
Page 20 of 20
Document history
New or Revised Topic
Described In
Date
Updated hardware configurations
Table 3
12/17/2019
Updated power specifications and power consumption
Table 8 and Table 9
12/17/2019
Added PWR-IE50W-AC-IEC= to Power Supply Options; Added details on IPv6
support and PROFINET support on key supported software features
Table 10 and Table 11 12/17/2019
Updated key supported software features: IP protocols, IP Multicast
Table 12
12/17/2019
Updated Management and Standards: RFC 5460 and SNMP MIB objects
Table 16
12/17/2019
Added new part numbers on SFP support
Table 17
12/17/2019
Fixed descriptions on product description in ordering information
Table 18
12/17/2019
